Flexi Angle Corner Trim (2.5m)
- Product Code: EUR-2083-1002
- Manufacturer Code: AA5064_2.5M
- Package Type: Packet
- Shopping Category: Hardware > Building Materials > Moulding
Flexi Angle Adjustable uPVC Corner Trim (2.5m)
Highly versatile and adjustable!
Tough uPVC flexible angle finishing trims for neat corner protection and concealment, internally and externally. Supplied as a short 2.5m (8ft 2in) length, with highly adjustable angle from 0-180°, and available in choice of width and colour.
Formed from tough 2mm thick exterior grade uPVC, with a central crease along length. Simply fold to desired angle and fit. Protects external corners from impact, covers unsightly internal/external corners and offers attractive, maintenance-free long-lasting defence against ingress of water and debris when used externally.
Features & Benefits
- Any angle usage - tightly flexible from 0° to 180°
- Professional finish - conseal unqightly corners
- Tough and durable - protects external corners
- Quick and easy fitting - cut, fold to angle and stick
- Internal or external use - exterior grade uPVC
- Reduces maintenance - no painting and easy clean
High quality material means that the flexi angle can be finely adjusted from 0° to 180° and will retain the adjustment you set.
Did you know? This uPVC flexi angle corner trim is also available in longer 5m lengths that can be supplied coiled in a smaller package, which can be more economical. See our separate listing for 5m trims.
Technical Information
| Measurement | Value |
|---|---|
| Material | uPVC plastic (some colours laminated) |
| Width | 50mm (25mm folded), 70mm (35mm folded), 100mm (50mm folded) |
| Thckness | 2mm |
| Length | 2.5m (8ft 2in), or 5m (16ft 5in) |
| Colours | Anthracite Grey - WGY1 (RAL 7016), Black Ash - WY, Golden Oak - WO, Rosewood - RO, White - 64 |
| Accreditations | BSI Approved |
| Guarantee | 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) |
Fitting of plastic Flexi Angle corner trims
Fitting the flexi angle is quick and easy. If you haven’t fitted them before, the following key points may be helpful:
- If you have ordered longer 5m trims and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting.
- For cutting, we recommend the use of gasket shears, or junior hacksaw.
- Simply fold along crease to desired angle. You can use the corner that you’re covering to help form the angle.
- Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape.
- Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use.
- Future cleaning should require no more than a wipe with warm soapy water.
