From: £5.35
Buy More & Save More (see tiered pricing table below)
Buy | Price |
---|---|
1 to 2 | £6.22 |
3 to 5 | £5.99 |
6 to 8 | £5.78 |
9 to 11 | £5.57 |
12+ | £5.35 |
Price incl. VAT - Delivery cost
Ready to despatch!
- Product Code: BON-1077-1001
- Manufacturer Code: BDCF1
- Package Type: Packet
- Shopping Category: Hardware > Building Consumables > Hardware Glue & Adhesives
Solvent Cleaner for PU Foam Guns
(500ml)
Dissolves fresh foam to prolong gun life and... more
Product information "Bond-It PU Expanding Foam Gun Cleaner (500ml)"
Solvent Cleaner for PU Foam Guns
(500ml)
Dissolves fresh foam to prolong gun life and clean surfaces
Designed with a standard-thread adaptor ring that screws directly onto all commonly used guns, and a detachable spray head for handheld applications.
Features & Benefits
- Fast acting – quickly dissolves fresh foam within minutes
- Dual action – can be fitted directly to PU foam guns, or used in-hand
- Highly compatible – suitable on a wide range of building materials and surfaces
- Easy to use – no special tools or skills required
- Quality assured – developed in accordance with the ISO 9001/EN 29001
- Environmentally safe – no CFC-propellants; complies with EU-regulations
Technical Information
Measurement | Value |
---|---|
Volume | 500ml |
Application | Run-through gun and handheld spray |
Solvent/Base | Acetone |
Consistency | Aerosol |
Shelf Life | 12 months from date of manufacture when stored correctly |
Storage | Pressurised container; protect from sunlight. Store at temperatures between +5°C and +30°C in cool, dry conditions |
Certification | ISO 9001, EN 29001 |
Application & Usage
Preparation
Use with extreme care. A suitability test on surfaces such as plastics, lacquers, coatings, paints, and textiles, is recommended.
Cleaning Foam Guns
- Remove the PU foam can from the gun and fit the spray head nozzle to the foam cleaner to clean the adaptor ring and outer body of the gun.
- Remove the spray head from the foam cleaner and, with the gun trigger pulled to depressurise the can, carefully screw the can onto the gun.
- Pull the trigger to purge the gun. As soon as cleaning fluid appears at the tip of the gun, release the trigger, and allow the cleaner to dissolve the foam on the inside of the gun for approximately two minutes. Flush out the gun into a waste container.
- Repeat step 3 until only clear cleaning fluid comes from the gun.
- Once the cleaning procedure is completed, unscrew the foam cleaner from the gun.
Cleaning Other Surfaces
- Fit the spray head to the foam cleaner and spray on the uncured foam.
- Wipe the surface clean with a dry cloth once foam has dissolved.
Not suitable for cured foam.
Related links to "Bond-It PU Expanding Foam Gun Cleaner (500ml)"
You've Viewed