The Inner Capping features rubber gaskets and creates a water-tight seal over the glazing when screwed to the rafter. All fixings are concealed and water ingress eliminated by the durable Outer Capping which snap-fixes securely over the Inner Capping. A heavy duty End Cap provides secure and decorative closure to end of bars, while helping to prevent slippage of Outer Capping and glazing material.

Base Gaskets, which sit directly on timber rafters underneath the glazing material, can be supplied to provide a rubber seal under glazing material if required.

Features & Benefits

• Extruded aluminium - strong and lightweight
• Maintenance-free - no annual painting required
• Durable powder-coating - no discolouring
• Long-life material - no warping or cracking
• Quick and simple - pre-drilled Inner Capping with snap-fix Outer Capping
• Custom colour option - can paint to any RAL colour
• Attractive profile - low contour with concealed gaskets
• Compatible with glass - unlick most Snap-Tight systems

Shape and height of the 60mm Main Bar compliments the 45mm version, so can be used together on the same roof. The 60mm Main Bars are available in a choice of colour, length and with or without 45mm and 55mm base gaskets.

Custom Colour Option - There's no problem if you want to match an existing RAL colour. Just choose 'Custom Colour' when ordering and contact us to provide the RAL code.

Technical Information

Fitting ALUKAP-XR Main Bar

1. Cut the Inner Capping and rubber gaskets to desired length
2. Insert gasket into Inner Capping gasket grooves
3. If using, fix Base Gasket to timber rafter before laying glazing material
4. Position Inner Capping on glazing, directly over rafter
5. Drill pilot holes through pre-drilled holes in Inner Capping
6. Screw Inner Capping down to create a uniform seal on glazing material - be careful not to over-tightening
7. Screw the End Cap in place
8. Use sealant to make additional seals around abutments or connections to walls, hip bars or ridge bars if required
9. Cut Outer Capping to required length and snap-fix on to the Inner Capping

The above is offered only as a guide and not as complete fitting instructions for all scenarios.