K2 Starter End Cap Replacement Kit

K2 Starter End Cap Replacement Kit
£10.16 *

Prices incl. VAT (excl. delivery)

Colour:

  • K2-1767-1003
  • K2-1767-1003
  • Large Letter
  • Hardware > Building Materials > Roofing
Glass Stop and Decorative Cap for K2 End Bars (White, Chocolate Brown or Caramel) Stop... more
Product information "K2 Starter End Cap Replacement Kit"

Glass Stop and Decorative Cap for K2 End Bars

(White, Chocolate Brown or Caramel)

Stop Leaks Caused by Slipped Roof Panels

Pair of left and right end caps (C9036) with glass retaining plates (C9039) for K2 conservatory starter bars.

These decorative end caps are used as a closure for the gable or wall bars of lean-to roofs and can be fittind to new installations or as replacement of broken or missing consrvatory end caps.

Features & Benefits

  • Stops roof panels slipping
  • Decorative sculptured design
  • Tough and durable metal plate
  • Supplied with fixings
  • Quick and easy to fit

End caps like these were often used to prevent roof panels slipping down towards the gutter but the weight and constant movement of roof material means that an end cap alone is not adequate. That's why we supply them with the Glass Retaining Plates, which do the heavy work behind the end cap.

Broken or missing end caps and retainers are a typical cause of slipped roofing panels, which often results in leaks to a conservatory roof.

  • 1 x C9036 Starter End Cap (Left)
  • 1 x C9036 Starter End Cap (Right)
  • 2 x C9039 Glass Retaining Plates
  • 4 x M4 x 25mm Screws and Caps

DetailValue
End Cap Size Height: 117mm, Width: 74mm
End Cap Colour White, Chocolate Brown (Mahogany/Rosewood) or Caramel (Oak)
Materials uPVC Plastic (End Caps) and Steel (Plate and Screws)
Compatibility K2 Wall and Gable Bars

  1. Position the Glass Retaining Plate so that its bottom closely aligns with the bottom of the glazing bar and that one of it's screw holes lines up with the bottom screw-port at the end of the glazing bar.
  2. Put one of the screws through an appropriate hole near the bottom of the end cap and screw loosely to the bar.
  3. Push second screw through a cover cap base and then through the top hole on the end cap before screwing into the top screw-port.
  4. Tighten both screws and fit the screw cover cap and cover plate.
Related links to "K2 Starter End Cap Replacement Kit"
Read, write and discuss reviews... more
Customer review for "K2 Starter End Cap Replacement Kit"
Write a review
Reviews will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

You've Viewed