Prices incl. VAT (excl. delivery)
- Product Code: CLE-1676-1003
- Manufacturer Code: AKX452W
- Package Type: Parcel XL
- Shopping Category: Hardware > Building Materials > Roofing
60mm Aluminium Capping for Gable End Rafter
Choice of colour, length and base gasket
Attractive closure. Superior sealing!
Premium quality, Inner Capping for 60mm (2 9/25") timber gable end rafters. The Gable Bar comes as three parts, a mill-finished aluminium Inner Capping, an aluminium powder-coated Gable Outer Capping and cast aluminium End Cap.
The Inner Capping gets screwed to a rafter and its rubber gaskets create a water-tight seal over the glazing. The durable Gable Outer Capping snap-fixes securely over the Inner Capping to conceal fixings and prevent water ingress. The Gable Outer Capping extends down on the open side to form a deep drip that cloaks over the end rafter. A heavy duty End Cap provides secure and decorative closure to end of bars, while helping to prevent slippage of Gable Outer Capping and glazing material.
Base Gaskets, which sit directly on timber rafters underneath the glazing material, can be supplied to provide a rubber seal under glazing material if required.
Features & Benefits
- Extruded aluminium - strong and lightweight
- Maintenance-free - no annual painting required
- Durable powder-coating - no discolouring
- Long-life material - no warping or cracking
- Quick and simple - pre-drilled Inner Capping with snap-fix Gable Outer Capping
- Custom colour option - can paint to any RAL colour
- Attractive profile - low contour with concealed gaskets
- Compatible with glass - unlick most Snap-Tight systems
Shape and height of the 45mm Gable Bar compliments the 45mm and 60mm Main Bar, so can be used together on the same roof. It is available in a choice of colour, length and with or without 45mm and 55mm base gaskets.
Custom Colour Option - There's no problem if you want to match an existing RAL colour. Just choose 'Custom Colour' when ordering and contact us to provide the RAL code.
|Finish||Powder-coated. White, Dark Brown or Custom Colour (specify RAL code).|
|Material||Aluminium extrusion (Inner Capping and Outer Capping)
EPDM rubber (Glazing Seal Gaskets and Base Gasket)
|Height||20mm (65mm including drip face)|
|Length||3m, 3.6m, 4.8m or 6m|
|Base Gasket Option||None, 45mm or 55mm|
|Weight||940g per metre (approx)|
Fitting ALUKAP-XR Gable Bar
- Cut the Inner Capping and rubber gaskets to desired length
- Insert gasket into Inner Capping gasket grooves
- If using, fix Base Gasket to timber rafter before laying glazing material
- Position Inner Capping on glazing, directly over rafter
- Drill pilot holes through pre-drilled holes in Inner Capping
- Screw Inner Capping down to create a uniform seal on glazing material - be careful not to over-tightening
- Screw the End Cap in place
- Use sealant to make additional seals around abutments or connections to walls, hip bars or ridge bars if required
- Cut Gable Outer Capping to required length and snap-fix on to the Inner Capping
The above is offered only as a guide and not as complete fitting instructions for all scenarios.
|Roof Structure:||Timber Supported|
|Glazing Compatibility:||Glass (Single Pane), Glass (Double-Glazed), Polycarbonate/Acrylic (Solid), Polycarbonate (Multiwall)|
|Glazing Thickness:||10mm, 16mm, 24/25mm, 32mm, 35mm, Any|