Prices incl. VAT (excl. delivery)
Ready to despatch!
- Product Code: LIV-1165-1002
- Manufacturer Code: LIV-1165-1002
- Package Type: Packet
- Shopping Category: Hardware > Building Materials > Roofing
Glazing Support for Timber Roofs
Stops polycarbonate and glass units slipping!
Steel, J-shaped support brackets. Design to stop glass and polycarbonate panels from slipping - one of the most common causes of conservatory roof leaks.
It is recommended that 2 x support brackets are used per glazing panel. The brackets are fitted to the timber eaves beam and hook over the front face of the glass or polycarbonate roofing material.
Features & Benefits
- Fixing Hole - pre-drilled for single screw fix
- 10/16/25mm Glass/Polycarbonate - hook can hold up to 31mm thickness
- Maintenance-Free - just fit the tough steel brackets and they do the rest
- 5 Year Guarantee - long product guarantee
Who uses Sunwood?
Sunwood is the glazing system of choice for the fixing and weather-proofing of glass or polycarbonate glazing to timber roof structures. As an easy-fit system, Sunwood is being used increasingly by home DIY enthusiasts, as well as trade customers who have come to trust this high quality system.
|Size (Length x Width x Height)||103mm (approx) x 20mm x 36mm |
|Material||Stainless Steel (2.5mm)|
Fitting Sunwood Glazing Support Bracket
Firstly, decide on the resting position of the glazing material, allowing the required amount of overhang into the gutter. You can then determine where on the timber eaves beam each bracket should be fixed. We recommend that 2 x brackets are used for each glazing panel and these should be screwed down onto the timber eaves beam.
Should you wish, you could optionally mark around the bracket and chisel out the wood to a depth of approximately 4mm to sink the bracket flush with the top of the eaves beam.
The above is a summary only and not intended as comprehensive fitting instructions.