3m EasyRidge F Dry Fix Ridge Kit

3m EasyRidge F Dry Fix Ridge Kit
From £25.20 *

Prices incl. VAT (excl. delivery)

Colour:

  • EAS-1696-1001
  • EASYRIDGE3MTR
  • Parcel
  • Hardware > Building Materials > Roofing
3m Universal 'Dry Fix' Ridge/Hip Kit Available in Black or Terracotta... more
Product information "3m EasyRidge F Dry Fix Ridge Kit"
Venilated Ridge Roll from EasyRidge Dry Ridge Kit
Nylon Ridge Union from EasyRidge Dry Ridge Kit
Ridge Batten Bracket from EasyRidge Dry Ridge Kit

3m Universal 'Dry Fix' Ridge/Hip Kit

Available in Black or Terracotta

Mortar-free, ventilated ridge or hip!

Quick and simple mechanical fixing of almost all ridge tiles and hips (with dedicated Hip Tray). Guaranteed for 20 years, this kit forms a ridge that is resistant to water and allows the roof to breath.

The ventilated Ridge Roll provides the equivalent of 5mm continuous airflow and it's malleable, crimped aluminium skirt with flexible ridge tile Unions are the key components that make this kit so effective - together, they offer long term security with a quality water seal.

Features & Benefits

  • Quick and easy to fit - no special tools or skills required
  • Fit under any dry conditions
  • Fully serviceable - easy to maintain even after many years
  • Ventilated ridge - allows roof to breath
  • Use on Ridge OR Hips - dedicated Hip Tray required
  • Effective year after year - resistant to freeze/thaw cycles plus thermal expansion and contraction
  • Long-life durable fixings - Stainless Steel and Nylon
  • 20 year guarantee - British Standard product you can trust
  • 7 unions supplied - enough unions for standard length ridge tiles over 3m ridge. More unions may be required is ridge tile is shorter than 400mm.

The Easy Ridge F complies with BS 5250 and BS 5534 and is manufactured to DIN 4108/3. The dry fix system is recommended by NHBC.


CAN BE USED ON HIPS! EasyRidge is great on hips too! Just requires a dedicated Hip Try to be fitted under the ventilated roll. We can supply the dedicated 1.2m long Hip Trays if required.

3m Ventilated Ridge Roll

Polypropylene mesh fabric with spine and malleable crimped aluminium skirt, which makes it easy to dress over contoured tiles. Underside of skirt has high butyl adhesive strips for sealing against roof tile.

Material Polypropylene and Aluminium
Length 3,000mm
Width 300mm
Colour finge and clips Black or Terracotta

Ridge Unions (7 Pack)

Tough and flexible Nylon unions that you can use with almost all ridge tile, including angled and half round profiles of concrete or clay. Adjoining ridge tile sit on either side of a union up-stand and are trapped securely with 3 'ratchet' clips , the central one featuring a screw port to fasten to ridge batten with provided stainless steel screw.

Material Nylon (union and ratchet clips), Stainless Steel (screw fixings)
Length 304.8mm
Width 50mm
Height 20mm
Colour Black

Each of the 7 x Unions is supplied with 1 x Large Ratchet Clip, 2 x Small Ratchet Clips and 1 x Stainless Steel screw.

* Measurements taken when union flat.

Ridge Batten Brackets (5 Pack)

Stainless steel brackets, pre-formed with saddle to hold Ridge Fixing Batten and nail holes for fixing to roof truss rafters at 450mm and 600mm centres.

Material Stainless Steel (brackets), Stainless Steel (cloat nails)
Saddle Height 29mm
Saddle Width 20mm
Saddle Depth 50mm
Leg Width 40mm
Leg Length 176mm

Supplied with a quantity of Stainless Steel cloat nails.


The kit is supplied with fitting instruction to help you through the process but be assured, fitting is quick and easy compared to mortar fitting and other dry-fix systems.

  1. Install roof underlay and battens as normal but finish underlay 30mm short of apex on either side and don't fit last batten
  2. Construct ridge fixing batten and fix to Ridge Batten Bracket before nailing to roof truss
  3. Fix top tiling batten with minimum 10mm air gap between it and ridge batten, then lay and fix the tiles as normal
  4. Unroll EasyRidge F over the ridge batten, ensuring coverage over top course of tile and secure with corrosion resistant staples or nails
  5. Remove release paper from the butyl adhesive strips and dress neatly onto the dry/clean tiled surface
  6. Prepare the Unions by lightly pressing one large fixing clip (in the central slot) and 2 smaller ratchet clips
  7. Place end ridge tile and insert the prepared ridge union under and between the ridge tiles.
  8. Loosely tighten the 3 ratchet clips down onto the union.
  9. Secure to ridge fixing batten with Stainless Steel screw through central fixing clip
  10. Pushing the ratchet clips into the union to secure.
  11. Continue process along the ridge
Related links to "3m EasyRidge F Dry Fix Ridge Kit"
Read, write and discuss reviews... more
Customer review for "3m EasyRidge F Dry Fix Ridge Kit"
Write a review
Reviews will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

You've Viewed