Prices incl. VAT (excl. delivery)
Ready to despatch!
- Product Code: EAS-1636-1001
- Manufacturer Code: EASYTRAY1.5
- Package Type: Parcel XL
- Shopping Category: Hardware > Building Consumables > Masonry Consumables > Cement, Mortar & Concrete Mixes
1.5m Felt Support Tray
Brass Yale Anti-Bump Cylinder side
Profile of Felt Support Tray
Under Eaves Protector Felt Support Tray
Supports felt and protects against ponding
Durable, plastic Felt Support Tray prevents sagging of overlapping sarking felt to avoid the ponding of moisture that can result in the breakdown of roof membrane, fascia and timber rafters.
Cost effective eaves protection system also acts as an effective support to felt that may have deteriorated due to UV destabilisation.
Features & Benefits
- Durable and lightweight
- Quality, non-brittle PVC
- Quick and easy to install
- Use will all slate and tile
- Resistant to decay
- Improves the performance of other roofing materials
|Size (length x width)||1500mm x 250mm (175mm tray, 30mm ledge, 55mm skirt)|
|Related Products||10mmm Over Fascia Vent, 25mmm Over Fascia Vent, Eaves Comb Filler, 2-in-1 Vented Eaves Protector|
Installing the Felt Support Tray
Place over the top of fascia (or Over Fascia Vent if fitted) with the short edge hanging over the gutter and nail to roof rafters. Adjacent trays can be overlapped by a minimum of 100mm to form a continuous run. Fix an Eaves Comb Filler on top at the same time if required.