Windsor Solid uPVC Door Panel

Windsor Solid uPVC Door Panel
This product is currently not available.
£999.00 *

Price incl. VAT - Delivery cost

Thickness:

  • HUR-1698-1001
  • WINS_800X1920-20
  • Parcel XL
  • Hardware > Building Materials > Doors
Reinforced Panel with Rectangular Mouldings (20mm, 24mm or 28mm thick) Solid panel with... more
Product information "Windsor Solid uPVC Door Panel"

Reinforced Panel with Rectangular Mouldings

(20mm, 24mm or 28mm thick)

Solid panel with decorative moulding to inside and out

Tough uPVC door panel with decorative moulding. UV stable PVC-u sheets with Polystyrene infill, reinforced with 4mm MDF. Available in three thicknesses, these attractive smooth white panels can be easily cut and fitted.

Used to replace dated, tired and damaged panels in PVC-u doors.

Features & Benefits

  • Stronger and more secure with MDF reinforcement
  • Standard white matches most profiles
  • Colourfast and UV stable
  • High impact and chemical resistance
  • Manufactured to industry standards
  • Fire resistant and self-extinguishing
  • Weatherproof and rot resistant
  • Totally recyclable and non-toxic
  • Attractive double border feature

Manufactured in accordance with BS 476 Part 7 - Spread of Flame Class 1 and BS 4735, with self-extinguishing fire retardant materials and fullfils Part L Building Regulations.


Technical Information

MeasurementValue
Panel Size (w x h) 800mm x 1900mm
Panel Thickness 20mm, 24mm or 28mm
Outer Skin 1.5mm PVC-u sheet
Infill Material Polystyrene and 4mm MDF board
Colour White 626
Standards Compliance Part L Building Regulations, BS 476 Part 7 - Spread of Flame Class 1, BS 4735.
Minimum Cut Size (W x H) 550mm x 1590mm

Fitting PVC-u Door Half Panels

Fitting the panels is fairly straight forward but we offer 5 useful pointers to bear in mind.

  1. Leave protective film in place to prevent scratches during handling. Be sure to peal off before fitting, or peel back from the edges, so that it does not get trapped by the beads.
  2. A decorators paint scraper or similar tool can be used to remove any beads. When removing, it is easier to start with the longer ones. When replacing beads, the longer ones should be done last. As you remove beads, mark the back of them to identify where they came from (ie. top, right, bottom, left) as they should be put back in the same position.
  3. When measuring and cutting to size, remember the phrase 'measure twice - cut once'. Be sure the measurement is correct as a cut can't be undone.
  4. Fine toothed handsaw or jigsaw blade is most suitable for cutting the panels.
  5. Soft headed hammers can be used to encourage reluctant beads to go back in when they are fitted nice and tight. Remember that cold temperature can make PVC-u brittle.
Related links to "Windsor Solid uPVC Door Panel"
Read, write and discuss reviews... more
Customer review for "Windsor Solid uPVC Door Panel"
Write a review
Reviews will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

You've Viewed