Skip to product information
1 of 6
Decking Edge Trim

Decking Edge Trim

SKU: ESU-2116-1001
MPN: EC-EDGETRIM-AB

Regular price £13.58
Regular price Sale price £13.58
Sale Sold out
Tax included. Shipping calculated at checkout.

Out of stock

View full details
Description

Decking Corner Edge Trim

(Available in four natural colours)

Protects and closes exposed edges!

Tough rigid angle for concealing exposed edges of hollow decking boards and providing a protective defined edge around your decking area. Colour-matched to hollow decking board, Edge Trim is a low-cost alternative to solid Step/Edge Nosing.

Simply position over deck edge and fix through side face into fascia to every joist with plastic-headed pins, or pre-drilled and screwed.

Features & Benefits

  • Incredibly hard-wearing - withstands the roughest treatment
  • Quick and easy fitting - easy to handle with special fixings
  • Low maintenance - no treating, simply wipes clean
  • Neat finish to decks - hides open edges and covers joint
  • Great value solution - lower cost than solid Step/Edge Nosing

Part of our Composite Hollow Decking range, which is made using homogenous wood polymer, so more durable than timber, with high resistance to damage. Constructed from ethically sourced, traceable recycled wood from timber mills and recycled plastic polymer.

How many boards and clips do you need?

Based on a sub-frame with maximum joist centres of 350mm, the following can be used as a guide.

  • 2 x Hollow Boards per sq mtrs.
  • 12 x T-Clips per board to secure to joists.
  • 12 x Starter Clips per starter and end board to secure outside edge to frame.

Working out quantities

Multiply length and width of area to be decked to get the square meterage, then divide by 2 to get the number of boards needed.

Example Deck Area (5.5m length x 3m width)
Area is 16.5 m2 (5.5 x 3) and Boards Per Run is 1.5 (5.5 ÷ 3.66 (Board Length)).
Boards = 33 - Area x Boards Per m2 (16.5 x 2)
T-Clips = 377 - Boards - Boards Per Run) x T-Clips Per Board (33 - 1.5 x 12)
Starter Clips = 37 - (Boards Per Run x Starter Clips Per Board) x 2 ((1.5 x 12) x 2)

Parts Calculator

Use this form to help estimate the quantity of boards and clips required.*

*Measurements should be taken in Metres, and the longest dimension used for Length. Repeat the above calculations for multiple areas, if the deck area is not a standard rectangle.

Do you have a question about this product?

Contact us