Product information "Anthracite Grey uPVC Flat Door Panel"
Anthracite Grey Grained UPVC Flat Door Panel
(Choice of size and colour)
Replaces damaged panels or glass units!
Anthracite grey, grained fire-resistant uPVC door panel for new-build, or replacement of damaged or broken units. Available in choice of sheet size, these infill panels are simple to cut, and easy to install.
Manufactured to the highest British quality and safety standards, these reinforced panels feature a strengthening MDF core, sandwiched between insulating foam that is bonded to heat and moisture resistant PVC-u skins to maintain the integrity of the panel.
Features & Benefits
UPVC - excellent protection from moisture, scratches and stains
Weatherproof - fantastic resistance against the outside elements
Security - MDF and foam filled core provides extra internal strength
Fire-Resistant - specially formulated to restrict burning up to BS4735 standard
Environmentally Friendly - totally recyclable and non-toxic
Did you know? The flat anthracite grey coloured sides of the panel feature a subtle textured grain, which runs perpendicular to the 900mm side. Also, these panels have a 5 year guaranteed against cracking and UV discolouration.
Manufactured in accordance with BS 476 Part 7 - Spread of Flame Class 1 and BS 4735, with self-extinguishing fire retardant materials and fulfils Part L Building Regulations.
Technical Information
Product Detail
Value
Panel Size (W x H)
900mm (35.43") x 700mm (27.55") 900mm (35.43") x 1050mm (41.33")
Panel Thickness
28mm (1.1")
Material
UPVC
Infill Material
Foam with MDF core
Finish & Colour
Finished on the outside in Anthracite Grey with a choice of Anthracite Grey or White inside
Standards Compliance
Part L Building Regulations, BS 476 Part 7 - Spread of Flame Class 1, BS 4735
Fitting PVC-u Door Panels
Fitting the panels is fairly straight forward but we offer 5 useful pointers to bear in mind.
Leave protective film in place to prevent scratches during handling. Be sure to peal off before fitting, or peel back from the edges, so that it does not get trapped by the beads.
A decorators paint scraper or similar tool can be used to remove any beads. When removing, it is easier to start with the longer ones. When replacing beads, the longer ones should be done last. As you remove beads, mark the back of them to identify where they came from (ie. top, right, bottom, left) as they should be put back in the same position.
When measuring and cutting to size, remember the phrase ’measure twice - cut once’. Be sure the measurement is correct as a cut can’t be undone.
Fine toothed handsaw or jigsaw blade is most suitable for cutting the panels.
Soft headed hammers can be used to encourage reluctant beads to go back in when they are fitted nice and tight. Remember that cold temperature can make PVC-u brittle.
Related links to "Anthracite Grey uPVC Flat Door Panel"
