Bond-It BDSAT Sealant Applicator Tool Kit
From: £3.21
Buy More & Save More (see tiered pricing table below)
| Buy | Price |
|---|---|
| 1 to 3 | £4.16 |
| 4 to 9 | £3.59 |
| 10+ | £3.21 |
Price incl. VAT - Delivery cost
Ready to despatch!
- Product Code: BON-2182-1001
- Manufacturer Code: BDSAT
- Package Type: Large Letter
- Shopping Category: Hardware > Tools > Caulking Tools
Silicone and Sealant Applicator Tool Kit from Bond-It
Shape and smooth any type of sealant effortlessly!
Set of four flexible sealant spreaders, for smoothing joints, corners, and edges, to give a professional finish every time. Suitable for use with silicones, caulks, and other sealants, and supplied with easy to follow instructions in a handy carry case.
Manufactured by Bond-It, the Sealant Applicator Toolkit is used by both trade professionals, and DIY enthusiasts, to create neat recessed joints, perfectly flush joints and tidy fillet joints with any type of mastic sealant.
Features & Benefits
- Professional results - perfect finish every time
- Simple and easy to use - suitable for DIY enthusiasts
- Variety of uses - any joint type up to 28mm
- All sealant types - use with silicone, sealant, and caulks
- Safe and organised - protective carry case
- Environmental friendly - fully recyclable material
The flexible and easy-clean plastic spreader tools provide 15 smoothing profiles, which can be used independently, or together to achieve the desired look.
What you get
Each kit contains a tool for connection joints, expansion joints, and two compact tools for hard to access areas.
- 1 x Connection Joint Finishing Tool
- 1 x Expansion Joint Finishing Tool
- 2 x Narrow Area Finishing Tools
- 1 x Carry Case
- 1 x Instruction Leaflet
Technical Information
| Measurement | Value |
|---|---|
| Contents | 4 finishing tools for connection and expansion joints, plus hard to reach areas |
| Material | Flexible plastic |
| Finishing Profiles | 15 finishing profiles including recessed, flush and filleted |
| Application | Spreading and finishing of silicone, sealant and caulks, internally and externally |
Using the Bond-It Sealant Applicators
Before applying any sealant, prepare the surface in accordance to sealant manufacturer's instructions, and ensure the area is clean and dry before starting. Having applied a suitable amount of sealant along the joint, select the appropriate tool. The tool should be held at an angle that will encourage the sealant into the joint, with the flat side of the tool facing the sealant. Apply light pressure as you glide the tool along the edge. Excess sealant will build up on the back of the tool, remove this at several stages during the process.
A few key points
- How to finish an expansion joint - Once sealant is applied, use the straight side of the Expansion tool to roughly clean up the area. You can then use the rounded edge of the tool to smooth the sealant whilst applying slight pressure as you go, to create a convex shape all along the strip.
- How to make neat external angles - External corners can be smoothed using one of the internal radius cutouts. The Expansion Joints tool provides a small radius, whilst the Connection Joints tool provides a bigger radius for wider corners.
- How to apply in narrow areas - The smaller, narrow shaped tools are designed to allow you to access those hard to reach areas, such as behind taps and pipes.
- How to remove dirt or uncured sealant - The angle numbered 0 (zero) can be used to remove dirt, or uncured residual sealant. New sealant can then be applied, and finished with an appropriate spreader tool.
The tools require a simple wipe after each use, and can also be fully washed with warm soapy water.
