Fix ALL Flexi Adhesive & Sealant Compatibility
- All usual building substrates, natural stone, treated wood, PVC, plastics
- Tested on the following metal surfaces: steel, AlMgSi1, brass, electro-lytic galvanised steel, AlCuMg1, flame galvanised steel, AlMg3 and steel ST1403.
- Good adhesion on plastics, including polystyrene, polycarbonate, PVC, ABS, polyamide, PMMA, fibreglass reinforced epoxy, polyester.
- There is no adhesion on PE, PP, PTFE and bituminous substrates.
- A surface activator is recommended for optimal adhesion and porous surfaces in water loaded applications should be primed
- As with all sealants, compatibility tests are always recommended
Soudal Fix All Flexi Technical Information
| Measurement | Value |
|---|---|
| Basis | SMX Hybrid Polymer |
| Consistency | Stable paste |
| Curing system | Moisture curing |
| Skin formation* (20°C / 65% R.H.) | Ca. 10 min |
| Curing speed * (20°C / 65% R.H.) | Ca. 2 mm/24h → Ca. 3 mm/24h |
| Hardness | 40 ± 5 Shore A |
| Density | Ca. 1,67 g/ml |
| Elastic recovery (ISO 7389) | > 75% |
| Maximum allowed distortion | ±20% |
| Temperature resistance | -40°C → 90°C |
| Max. tension (DIN 53504) | 1,80 N/mm² |
| Elasticity modulus 100% (DIN 53504) | 0,75 N/mm² |
| Elongation at break (DIN 53504) | 750% |
| Application Temperature | 5°C → 35°C |
| Colours | White, Black, Grey, Brown |
| Volume | 290ml |
| Cartridge Type | EU3 |
| Application | Standard skeleton gun |
| Joint dimensions | Min. width for bonding: 2mm Min. width for joints: 5mm Max. width for bonding: 10mm Max. width for joints: 30mm Min. depth for joints: 5mm Recommendation sealing jobs: joint width = 2 x joint depth. |
* These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.