- Product Code: TRU-2242-1001
- Manufacturer Code: TRU-2242-1001
- Package Type: Large Letter
- Shopping Category: Hardware > Building Materials > Roofing > Gutter Accessories
TruMAX K2 C8043 Conservatory Gutter Bracket
(Available in White or Chocolate Brown)
The strongest replacement K2 bracket ever!
Highly durable, easy-fit replacement bracket for K2 conservatory guttering. Simply clips onto the eaves beam, to provide concealed gutter hanging that lasts.
TruMAX K2 combines design improvements with new nylon technology, making it stronger by design and material.
Features & Benefits
- Stronger by design - original weak points strengthened
- Long life expectancy - tough and UV resistant
- Quick and easy to fit - no screws or tools required
- New improved design - stronger and easier to fit gutter
- Concealed fitting - top-hung so unseen from ground
- Zero maintenance - requires no annual painting
Did you know? The original K2 C8043 gutter bracket was notoriously weak and prone to breaking, due to poor design. This new bracket design removes the weak points, and is further strengthened by the high crystallinity of the Polyamide 6 nylon, which results in greater strength than all other K2 replacement brackets.
What you get
Each bracket is supplied as a single unit that needs no ancillary parts or fixings.
Technical Information
Feature | Value |
---|---|
Material | Nylon (Akulon K222-D, a high performance Polyamide 6 (PA6)) |
Length | 130mm |
Height | 55mm |
Thickness | 21mm |
Colour | White or Chocolate Brown |
Compatibility | K2 Conservatory Gutter (P6025/P6026). TruMAX K2 is a direct replacement for the K2 C8043 Gutter Bracket. |
K2 GUTTERING IS NOW OBSOLETE:
There is no longer any stock of K2 guttering parts, so if your problem goes beyond just broken brackets, then you may need to consider replacing the whole system. We have produced a Replacing K2 Gutter System guide that describes how to replace K2 guttering with FloPlast Niagara, an ogee system with a similar scalloped front. With higher flowrate, and more watertight joints, this could be considered an upgrade.
Fitting and Usage
Fitting the TruMAX K2 Gutter Bracket
The TruMAX K2 bracket features moulded clips at the top and the bottom of the bracket body that are used to secure the bracket to the eaves beam. The following instructions, which assumes that the gutter is already removed, should help you to fit the brackets and replace the guttering.
- Introduce the bracket, in it's normal upright position, to the eaves beam
- Fit the top clip over the top lip in eaves beam and pivot down to cause bottom clip to lock into place and secure the brackets
- The gutter can then be introduced to the bracket with the outside edge hooking over the end of the bracket
- Then pivot the gutter to swing the inside edge of the gutter up to the bracket until it clips into place.