Preview: Easy-Trim SP38 Breather Membrane Lapping Tape

Preview: Close-up of Easy-Trim SP38 Breather Membrane Lapping Tape

Easy-Trim SP38 Breather Membrane Lapping Tape

Close-up of Easy-Trim SP38 Breather Membrane Lapping Tape

From: £16.70
Buy More & Save More (see tiered pricing table below)

Buy	Price
1 to 2	£17.72
3+	£16.70

Price incl. VAT - Delivery cost

Ready to despatch!

Product Code: EAS-2088-1001
Manufacturer Code: OVERLAPTAPE
Package Type: Packet
Shopping Category: Hardware > Building Materials > Roofing > Roofing Shingles & Tiles

SP38 Breather Membrane Lapping Tape by Easy-Trim (38mm x 50m) A stronger bond and better... more

Close menu

Product information "SP38 Breather Membrane Lapping Tape"

SP38 Breather Membrane Lapping Tape by Easy-Trim

(38mm x 50m)

A stronger bond and better roofing felt seal!

High-tack, double-sided acrylic tape for creating an airtight and rainproof seal on all types of roofing underlay. Ready-to-use, Easy-Trim SP38 Breather Membrane Lapping tape can be applied quickly and easily, even at low temperatures.

SP38 breather membrane lapping tape is part of Easy-Trim’s range of specialist roofing products, which include an assortment of breather membranes to suit your application, and location.

Features & Benefits

Creates air-tight and rainproof sealing of over lap
Bonds, seals and connects all types of underlay
Suitable for sealing patch repair as well as lap joints
Applies easily, even at low temperatures
Excellent dimensional stability and workability

Technical Information

Measurement	Performance
Roll Width	38mm
Roll Length	50m
Backing	PET carrier
Release Liner	Low Density Polyethylene Film (LDPE) film
Adhesive	Polyacrylic adhesive
Tack	very high
Shear Strength	Medium
Adhesive Coat	240 g/m2
Adhesion	30 to 50 N/ 25mm
Temperature Range	-40°C +100°C
Heat Resistance	+130°C (short term)
Core diameter	76mm
Application temperature	-10°C +40°C (recommended > 5°C)

Fitting Easy-Trim SP38 Breather Membrane Lapping Tape

Ensure that both surfaces are clean, dry and in the correct position for a sound overlap, where the bond is under as little tension as possible. Apply the tape and rub to create good sealing.

Related links to "SP38 Breather Membrane Lapping Tape"