Price incl. VAT (excl. delivery)
- Product Code: EUR-1810-1022
- Manufacturer Code: ES15064
- Package Type: Parcel XL
- Shopping Category: Hardware > Building Materials > Roofing
9mm uPVC Plastic Soffit Board with Ventilation Holes
(Choice of colour and width)
Provides continuous airspace
9mm thick board with built-in ventilation slots provides equivalent of 10mm continuous airspace or 25mm equivalent on 450mm board.
It is best practice and a Building Regulation that roof space is well ventilated to protect against rot. Ventilation at the eaves is recommended and this can be done with over fascia vents or these ventilated PVC-u foam board fitted to the underside of a soffit.
Features & Benefits
- Vented profile provides 10mm airspace
- No warping, cracking or discolouration
- Exact colour match to our fascia system
- Compatible with our fascia systems
- British Standard quality you can trust
Why Choose our PVC-u Roofline Products?
Fascias and soffits play a crucial role in protecting the roof space. Neglected timber fascias and soffits can spoil the look of your home and cause expensive damage to your roof rafters.
Our PVC-u fascias, soffits and roof trims come with a 20-year guarantee (10 year for coloured laminated boards) against discolouration, warping and cracking and will give a property a new lease of life.
|Width||150mm, 200mm, 225mm, 250mm, 300mm, 400mm, 450mm and 605mm|
|Material||PVC-u foam board|
|Colour||White (WH), Black Ash (WY), Anthracite Grey (GY1), Golden Oak (WO) and Rosewood (RO)|
|Colour Fastness||BS1006 / 1990 Part A03 - Tests undertaken by BSI Testing for colour change resulted in an actual classification of 4 / 5 (where 1= most change and 5 = least change).|
|Fire Rating||Foam profiles: Tested to BS476 Part 7:1997 Class 1 surface spread of fire. Woodgrain profiles do not carry a fire rating.
Rigid profiles: Tested to BS476 Part7:1997 Class 1 surface spread of fire.
|Thermal Conductivity||Foam profiles: 0.07 (w/mk) - this low coefficient of thermal conductivity indicates thermal insulation properties better than brick, concrete or timber.
Rigid profiles: 0.14 (w/mk).
|Density||Foam profiles: 0.55 - 0.6 g/cm3
Rigid profiles: 1.40 - 1.50 g/cm3
|Quality and Standards||BS1006 / 1990 Part A03 Grade 4/5 Colour Fastness
BS476 Part 7:1997 Class 1 Fire rating< br />BS EN 1SO 9001:2000 Quality System
|Guarantee||Profiles are guaranteed against discolouration, warping and cracking, providing they are fitted to manufacturers recommendations. Standard profiles are covered for 20 years, foiled woodgrain profiles for 10 years.|
|Applications||Fitting to underside of roof soffit.|
Fitting and Usage
When being used as soffit board, the outside edge slots into a recess along the inner corner of the fascia, while the inside edge either rests on the outer brickwork, slots into a uPVC channel (25mm Board Clip) screwed to the wall, or is screwed to underside of battent along the wall.
When abutting boards, you can do this using a Panel Joint or 10mm Soffit Ventilator.