Buy More & Save More (see tiered pricing table below)
|1 to 2||£28.22|
|3 to 4||£26.71|
Price incl. VAT - Delivery cost
Despatched in 1 days!
- Product Code: MLY-2061-1016
- Manufacturer Code: MGU600_2/6
- Package Type: Parcel XL
- Shopping Category: Hardware > Building Materials > Roofing > Gutter Accessories
Marley Classic Ogee Profile Gutter System
(Lengths of 2m or 4m, in White or Brown)
As used on Ultraframe Classic Conservatory Roofs!
Marley Classic high capacity PVCu guttering with decorative ogee profile scalloped front that provides a traditional appearance on homes, small commercial property and Ultraframe conservatory roofs. Available in lengths of 2m or 4m.
Features & Benefits
- Decorative scolloped front - give traditional appearance
- High capacity drainage - double the flow capacity of a half round
- Can be fitted quickly and easily - simply clips together
- Corrosion resistant and self-coloured - resistand to effects of sunlight
- Quality you can trust - meets all relevant British Standards
- Versatile fixing options - choice of fixing brackets available
Marley Classic is a robust, 116mm wide by 75mm deep, gutter of choice for Ultraframe Classic conservatory roofs, but is also popular for domestic and small to medium commercial properties.
Did you know? When fitted to Ultraframe conservatories, the gutter usually sits on the eaves beam, which makes standard outlets unsuitable. Therefore, if replacing outlets, check before ordering as you may need the 'Offset' versions that come out the side.
The following provides information about the Marley Classic ogee profile guttering for houses and Ultraframe Classic conservatories.
|Gutter Size||Length: 2m, or 4m
|Component Size||Please refer to picture diagrams for size of individual parts|
|Application||Ultraframe Classic conservatory roofs, small to large houses, flats and small to medium commercial properties|
|Colour||White or Chocolate Brown (suits Rosewood or Mahogany frames)|
|Quality and Standards||BS EN 607: 1996 - Eaves gutters & fittings - PVCu. Definitions, requirements and testing.
BS EN 1462: 1997 - Gutter brackets. Classification, requirements & testing.
BS EN 12200-1: 2000 - Plastics rainwater piping systems for above ground external use - PVCu.
BS 4514: 1983 - Specification for PVCu, soil and ventilating pipes, fittings and accessories. Kite Mark licence No. 5265.
BS EN ISO 9001: 1997 - Quality systems. Model for Quality Assurance in Production, Installation and Servicing.
|Fire Resistance||Materials used are self extinguishing.|
|Outlet Position||Roof Area (m2)||Drainage Capacity (litres/sec)|
|Outlet at one end||103||2.16|
|Outlet at one end with an angle within 2m of outlet||93||1.94|
|Outlet in the centre||216||4.55|
From this we can see that a centre outlet almost doubles drainage so is more efficient and could mean less outlets required.
Fitting Marley Classic Guttering to Ultraframe Conservatory
The Marley Classic gutter attaches to the Ultraframe conservatory eaves beam (VAAA600 / VAA600H) by the use of concealed top-hung brackets (MGBA001 / MGBC001 (formerly MGBB001)), which are designed to snap-fit into place on the eaves and suspend the Marley Classic gutter over the eaves beams Under Gutter Trim (UGTB600).
Brackets should be fitted with a maximum of 750mm centres, and no more than 200mm from each corner or union. To fit the brackets, position the body of the bracket where you would like it to be on the eaves, hook over the lower rail and pivot the arm of the bracket upwards until the top of the body snaps into place.
Note that the screw fixing points on outlets and unions are not used when the gutter system is fitted to an Ultraframe conservatory.
Fitting Marley Classic Guttering to Traditional Fascia
Fitting to a standard house fascia would require the use of either the top hung concealed Internal Fascia Bracket, or the wrap-around External Fascia Bracket, which should be fitted with a maximum of 1m centres, and no more than 150mm from each corner or union. Marley Classic gutter should be fitted level without a fall.
Outlets and unions can be fixed directly to fascia using their screw fixing points.
More detailed information is available in the Ultraframe Classic Installation Guide and the Marley Rainwater Systems Installation Guide.