Kayflow 32mm Push-Fit Waste Water Parts

Kayflow 32mm Push-Fit Waste Water Parts

SKU: KAY-2453-1013
MPN: PF32KDB

£1.36

Sale

Tax included. Shipping calculated at checkout.

999 in stock

Quantity

View full details

Description

Kayflow 32mm Push-Fit Waste Water Fittings

Name: Kayflow 32mm Push-Fit Waste Water Parts
Brand: Kayflow
SKU: KAY-2453-1013
Price: 1.36 GBP
Availability: InStock

(Choice of component and colour)

Fast, flexible push-fit connections for low-volume waste

32mm push-fit waste fittings designed for domestic above-ground grey water drainage from bathroom sinks, cloakroom basins and similar low flow-rate applications. The system assembles instantly with no adhesives or solvents, while the demountable joints allow easy modifications, maintenance and future extensions without cutting pipework.

Manufactured from polypropylene to BS EN 1451, these fittings offer excellent chemical resistance and reliably handle hot waste water discharges. Integral rubber ring seals create secure, watertight connections. The full range — End Cap, Coupler, 45° Swept Bend, 88° Swept Branch, 90° Knuckle Bends, and Pipe Clips — covers all standard layout configurations, from simple straight runs to complex directional changes.

Features & Benefits

Push-Fit Installation – Assembles in seconds without glue or specialist tools
Demountable Joints – Allows easy adaptation for future layout changes
Rubber Ring Seals – Create secure, watertight connections on contact
32mm Waste System – Suitable for bathroom sinks, cloakroom basins and other low flow-rate applications
Polypropylene Construction – Resistant to chemicals and hot domestic waste water
Swept Flow Options – Swept bends and branches promote smoother flow and reduce blockage risk
BS EN 1451 Compliant – Manufactured to recognised dimensional and performance standards
10-Year Kayflow Guarantee – Manufacturer-backed product assurance

Did you know? Bathroom basins typically discharges water much more slowly than a kitchen sink or bath, so a 32mm pipe provides adequate flow while taking up less space behind pedestals, vanity units and furniture.

Specification

Specification	Value
System Size	32mm or 40mm
Pipe Length	1.45m or 2.90m
Application	Domestic above-ground grey water drainage
32mm Typical Uses	Bathroom basins, cloakroom basins, vanity basins and other low flow-rate applications
40mm Typical Uses	Kitchen sinks, utility sinks, baths, showers, washing machines and dishwashers
Material	Polypropylene (PP)
Joint Type	Push-Fit with integral rubber ring seals
Insertion Depth	35mm
Compatibility	Not directly compatible with solvent weld systems (suitable universal or conversion fitting required)
Colour Options	White, Black and Light Grey
Standards	BS EN 1451 BSI Kitemark Plastic Piping Systems
Guarantee	10-Year Kayflow Guarantee

Contents

What You Get

The Kayflow Push-Fit Waste Water Fittings range includes the essential components for building and modifying domestic above-ground waste systems. Each fitting features integrated rubber ring seals for fast, tool-free push-fit assembly and fully demountable joints:

Coupler (Double Socket)

Kayflow Push-Fit Coupler Double Socket

Joins two lengths of pipe end-to-end in a straight run. Provides a secure, watertight push-fit connection for extending pipework.

45° Swept Bend (Double Socket)

Kayflow Push-Fit 45° Swept Bend

Creates a gentle 45-degree change in direction. The swept design promotes smoother flow and reduces turbulence or blockage risk compared to sharp bends. Suitable for gradual changes in direction in waste pipe runs.

90° Knuckle Bend (Double Socket)

Kayflow Push-Fit 90° Knuckle Bend Double Socket

Compact 90-degree elbow for tight turns. Double socket joins two pipes. Use where space is limited (swept bends are preferred for improved flow where possible).

90° Knuckle Bend (Single Socket)

Kayflow Push-Fit 90° Knuckle Bend Single Socket

Sharp 90-degree bend with one socket end and one spigot end. Suitable for connecting to traps or socketed fittings on one side and continuing with plain pipe on the other. Ideal for tight installation spaces.

88° Swept Branch (Triple Socket)

Kayflow Push-Fit 88° Swept Branch

Swept tee fitting that joins a branch pipe into a main run at a shallow angle. The swept entry improves flow from the branch and reduces blockage risk. Triple socket connects main pipe in/out plus one branch.

End Cap

Kayflow Push-Fit End Cap

Seals off the end of a pipe run not connected to anything else. Prevents debris entry, stops flow, and blanks unused outlets. Suitable for temporary terminations or future system extensions.

Pipe Clip (5 Pack)

Kayflow Push-Fit Pipe Clip 5 Pack

Secures pipework to walls or floors at recommended intervals. Prevents sagging and reduces stress on joints. Required for both vertical and horizontal runs in accordance with installation guidance.

Fitting & Usage

System Compatibility

32mm system – for bathroom basins, cloakroom basins, vanity basins and other low flow-rate applications.
40mm system – for kitchen sinks, utility sinks, baths, showers, washing machines and dishwashers.
Reducer – use the 40mm to 32mm reducer when connecting a 32mm branch into a 40mm main waste line.
Compatibility – Push-Fit and Solvent Weld systems are not directly compatible, but can be joined using a suitable universal fitting.

Preparation & Installation

Measure and mark the required pipe length
Cut the pipe square using a fine-tooth saw or pipe cutter
Deburr and chamfer the cut edge with an appropriate tool or file
Wipe the pipe end clean of dust, grease or swarf
Apply a suitable silicone-based lubricant to aid assembly
Push the pipe firmly into the fitting to full insertion depth

Pipe Support

All pipework must be supported using pipe clips, both vertically and horizontally. Maximum support spacing for 32mm and 40mm waste pipe, as recommended by BS EN 12056:2000, is 1.2m vertically and 0.5m horizontally. Position clips close to fittings and changes in direction to prevent sagging and maintain the correct fall.

Dismantling

Push-fit joints are demountable. To disassemble, pull the pipe from the socket with a slight twisting motion. If the joint resists, a gentle rocking action will help release the seal. Inspect the rubber ring seal for damage before reassembly.

Important Notes

Where possible, use swept bends for changes in direction to promote smoother flow and reduce blockage risk
Do not use oil-based lubricants as they can damage the rubber seals
Test the system for leaks after installation

Delivery

SHIPPING

We endeavour to despatch most orders within 1 working day. Where possible, orders received before 1:00pm may be despatched the same day. Accurate despatch times are available on individual product pages.

Most orders (those being stock items below 1.2m in length) will be despatched same day when ordered before 1pm, and received the following delivery day. We deliver items of that size from Monday to Saturday. Stock items over 1.2m are sent using a two-day carrier, who do not deliver on a weekend.

Due to the size and nature of some bespoke, and non-stock products, we offer restricted delivery options. Delivery options can be selected at the checkout page before payment Is made.

DELIVERY AND RETURNS

Any dates quoted for delivery of the goods are approximate only and Truly PVC shall not be liable for any direct, indirect or consequential loss suffered by the customer arising from any delay in the delivery of the goods.

All deliveries must be received, and where appropriate, signed for, by a person over the age of 18 years old.

Delivery takes place, and risk passes to you, at the earliest of the following:

When the goods are handed over to you or your agent at Truly PVC’s premises.
When the goods leave the premises of Truly PVC.
On the 7th day after you have been notified that the goods are ready for despatch.

Customers should notify us within 7 days of the invoice date for any alleged defect, damage, failure to comply with description, missing items, or discrepancies. If no notification is made within this period, the goods are deemed accepted and free from defect.

Customers are responsible for obtaining any necessary licences or permissions for importing goods into their country of destination.

Long Lengths (over 1.2m)

For any product over 1.2m in length we cannot guarantee a ‘Next Day’ delivery service. Products over 1.2m have to be manually handled in some Depots and this can often add 1 – 2 days to the delivery time.

DELIVERY PROHIBITIONS

Orders for aerosol items, items over 1m, or deliveries to remote locations (e.g., Scottish Highlands, offshore islands, Northern Ireland) may not be fulfilable or may incur a surcharge.

Should this be the case, we will contact you with the option of either paying the surcharge or cancelling the order. Remote postcodes include AB30-AB38, AB40-AB56, BT, FK17-FK21, G83, GY, HS, IM, IV, JE, KA27-KA28, KW, PA20-PA99, PH, TR21-TR25, ZE.

COLLECTION (from our Warehouse)

To collect your order, choose 'Collect in Person' as the shipping method. We will contact you if there is an issue preparing your order, so please provide a contact telephone number.

Stock items are usually available for collection 1 business day after ordering. For early collection or non-stock items (e.g., polycarbonate), please call 0161 339 4982.

Warehouse opening times:

Monday to Friday: 8:30am – 4:30pm
Saturday: 8:30am – 12:30pm
Sunday: 8:30am – 4:30pm

Unit 2, 34 Wood Street
Openshaw
Manchester
M11 2FB

*Bespoke items may take 1-2 working days to prepare for collection, with non-stock items, such glazing bars and roof sheets taking longer. Please enquire before making your journey to collect.

Reviews

Downloads

Item added to your basket