Supaspike and Supaspike Bolt-Down are designed for use with the Eco Fence Posts, which are available in a choice of three lengths; 1.8m (6 foot), 2.4m (8 foot) and 2.7m (8 foot 6 inch).

For soft ground, Supaspike can be used. Just drive it into the ground and slot the post down onto it. The finished size of Supaspike is 1.08m (3 foot 6 inch). If positioning a post over solid ground, such as a driveway or pavement, just use the Supaspike Bolt-Down, which has a footplate that can be bolted into the ground and the post slotted onto it.

Features & Benefits

• Easy-fit design - posts just slot over the top
• Choice of fitting - soft or hard ground options
• Outstanding strength - resilient to harsh treatment
• Complete system - part of Eco Fencing range
• UK Made - manufactured in the United Kingdom

Composite Eco Fence Posts Also Protect Wooden Fence Panels

Eco Fence Posts can support wooden panels and benefit also from their superior strength, weatherability and 20 year manufacturer warranty. Go one step further to prolong the life of timber panels by using a single Eco Fence Board as a gravel board to provide a protective barrier between the ground and wooden panels.

Did you know? In manufacturing Eco Fencing, recycled PVC granules are heated to 195° and the molten PVC is then fed into a tool to form the profile of the board or post. The profile is then immersed in a 6m tank of cold water to cool. Even after immersion, profiles may retain residual heat, which can cause profiles to sweet when packed and result in some blotching. This is expected and not a fault, the profiles will weather naturally, and the blotchiness will fade. PLEASE NOTE: In some situations, the colour of the boards may fade, but the integrity of the board will not be compromised. Should this happen, the appearance of the boards can be rejuvenated with a suitable exterior spray paint.

Another great use for Eco Fence Boards is to help prolong the life of timber panels, which can be done by using a single Eco Fence Board as a gravel board to provide a protective barrier between the ground and the wooden panel.

Technical Information

Fitting Eco Fencing Composite Fencing

The fitting of Eco Fencing posts, boards and trims is straightforward and does not require any special tools.

The fencing and posts can be sawn using a standard handsaw and standard fixings used with the Utility Strip to form 90° corners or close the open channel of an end post.

For more detail about how to fit Eco Fencing, please refer to our Eco Fencing Installation Guide.