- Product Code: UAP-2228-1001
- Manufacturer Code: PH600S-SSS-SL
- Package Type: Parcel S
- Shopping Category: Hardware > Building Materials > Door Hardware > Door Knobs & Handles
UAP Inline Pull Handle
(Available in 4 lengths)
Adds a modern, contemporary look to any door!
Long, straight pull handle with a brushed satin finish that gives a sleek, contemporary look to any door. Manufactured from durable, corrosion resistant 316-grade stainless steel, and suitable for internal and external use on timber, composite, aluminium, and glass doors.
Also known as a Guardsman pull handle, it can be fitted to one or both sides of the door and provides a choice of fixing methods including bolt-through (one side only), back-to-back (two handles required), and hidden fixing (timber doors only).
Features & Benefits
- Strong and hard-wearing - Made from 1.5mm stainless steel
- Anti-corrosion finish - Will not pit, rust or corrode
- Three fitting methods - Bolt-through, back-to-back, and hidden
- Slimline handle - Sleek appearance and easier to grip
- Fixings supplied - Everything needed to fit to your door
- Quality assured - Lifetime coating and 10-year mechanical guarantee
Suitable for both left and right opening doors, this handle uses a round 32mm bar, as opposed to the standard 38mm, which offers a more slimline appearance that is easier to grip. Features a modern brushed satin finish that remains looking great, and conceals the finger marks that are common on high use doors.
Take your pick of fitting methods
Bolt-Through
Used when a handle is required on only one side of the door. Fixings are concealed with just a discreet securing cap on the non-handle side.
Back-to-Back
When a handle is needed on both sides of a door, this is the method to choose. Designed for strength, plus quick and easy fitting.
Hidden
The perfect choice when fitting to a timber door. Handle fixes onto nuts inserted into the door, leaving the back of the door untouched.
What you get
Each handle is supplied with the fixings necessary for any of the three fitting methods. Components include (1, 2) threaded rods, (3) threaded insert nuts, (4) allen key, (5) brass reducer, (6) grub screw, (7) threaded securing caps, (8) plastic spacers, (9) steel gaskets, (10, 11) washers.
The Slime Inline Pull Handle is part of the UAP Nanocoast range, which is specifically designed for areas which are within a 25 mile radius of the coast, or within 5 miles of highly populated industrial areas. Nanocoast products are salt spray tested to ASTM B117 for 2,000 hours, and come with a lifetime coating guarantee, along with the 10 year mechanical guarantee. These straight inline pull handle will not pit, rust or corrode, no matter what environments you put it in.
Technical Information
Feature | Value |
---|---|
Material | 1.5mm 316-grade stainless steel |
Finish | Brushed/satin stainless steel |
Diameter | 32mm |
Length | 600mm, 900mm, 1200mm, 1500mm |
Fixing centres | 400mm (600mm handle) 700mm (900mm handle) 1000mm (1200mm handle) 1300mm (1500mm handle) |
Projection | 80mm |
Corrosion resistance | Salt spray tested to ASTM B117 for 2,000 hours |
Guarantee | Lifetime surface coating, and 10-year mechanical |
Fitting Instructions
Bolt-Through Fixing - One Side Only
- Measure the suitable distance and drill the holes 1-2mm larger than the bolt diameter. Refer to product images for the hole centres.
- Partially screw the 80mm or 45mm rods into the brass reducer and put the brass reducer into the leg of the handle. Tighten up the 2 grub screws on the leg of the handle to secure the brass reducers. If you prefer, you can use the 2 plastic washers and the 2 steel gaskets. Simple feed them onto the side of the door where the handle will sit.
- Adjust the bolts to the length you require by threading them into the brass reducer. Leave enough thread on the bolt to secure with the securing caps.
- Finally, fix the handle using the 2 threaded securing caps. Insert an Allen key into the side of the cap and tighten up firmly.
Back-To-Back Fixing - 2 Handles Required
- Measure the suitable distance and drill the holes 1-2mm larger than the bolt diameter. Refer to product images for the hole centres.
- Partially screw the 80mm or 45mm rods into the brass reducer. The bolt is suitable for most popular door thicknesses, but may need to be cut for glass. If you prefer, fit the steel gaskets to and the plastic washers over the bolt – the plastic washers are strongly recommended for glass.
- Fit the bolts into the holes in the door and screw on the brass reducer from the other side. Remember to include the plastic washer and the steel gasket.
- Secure each leg firmly with both grub screws.
Hidden Fixing - Timber Doors Only
- Measure the suitable distance and drill the holes 1-2mm larger than the bolt diameter. Refer to product images for the hole centres.
- Screw the threaded insert nut into the door using an Allen key.
- Screw the 45mm bolt into the insert bolt. Use an Allen Key to tighten it up firmly.
- If you prefer, you can use the 2 plastic washers and the 2 steel gaskets. Simply fit them onto the side of the door where the handle will sit. Screw the brass reducer onto the bolts above the plastic washer and the steel gasket.
- Fit the handle onto the brass reducers and tighten up the grub screws on both sides of the handle legs.