Heavy Duty Self-Supporting Gable / Starter / End Bar

From £57.38 *

Price incl. VAT - Delivery cost



  • MOL-1710-1001
  • LSEB25
  • Parcel XL
  • Hardware > Building Materials > Roofing
Starter End Glazing Bar (Various lengths and colours) Attractive watertight finish to... more
Product information "Heavy Duty Self-Supporting Gable / Starter / End Bar"

Starter End Glazing Bar

(Various lengths and colours)

Attractive watertight finish to open end

Strong aluminium end bar with attractive, sculptured uPVC cappings for gable end of lean-to roof. Can be used with polycarbonate and glass.

Part of the flexible and easy to use professionally engineered Heavy-Duty Self-Supporting Glazing System which can span 4m unpupported without cross bearers.

Features & Benefits

  • Self-Supporting - no need for timber rafters
  • Long-Life Durability - strong aluminium 'T' bar extrusion
  • Hardwearing and Low-Maintenance - PVCu Capping and Cladding
  • Excellent Weather Proofing - co-extruded gaskets
  • Polycarbonate or Glass - unlike others, this system can be used with glass
  • Choice of Thickness - locking points for 16, 25, 32 and 35mm panels
  • Cost Effective and Less Wastage - multiple bar lengths
  • Looks Good and Fits Well - Can be pitched from 5° upwards

Suitable for a variety of applications, including lean-tos, conservatory roofs, canopies and car ports.

Complete self-supporting roof system

The range includes Wall Plate for securing glazing bars to house wall, structural Eaves Beam for the low end, standard Main Bar for use as an intermediate between in-line sheets, Gable End Bar for exposed end of lean-to and Wall Bar for abutting a wall. The Wall Bar is the standard Main Bar with separate Flashing Trim.

Heavy Duty Self-Supporting Roof parts

Links to Related Products are provided below.


Aluminium - Glazing Bar
PVCu - Top Capping, Undercladding, End Cap
Steel - End cap screws

Bar Length 2.5m, 3m, 3.5m, 4m, 5m and 6m
Colour White, Chocolate Brown, Golden Oak, Rosewood, Anthracite Grey and Black
Pitch 5° and upwards
Maximum Span 4m (see Maximum Bar Spacing table below)

Maximum Bar Spacing by Bar Length

Bar Length2.5m3m3.5m4m
Max Centres 1200mm 1050mm 700mm 600mm

The Heavy-Duty Self-Supporting Roof has been designed to simplify the fitting process. With just a few steps, your bars could be fitted and your roof complete. The following is the typical fitting procedure:

  1. Fit Wall Plate and Front Eaves Beam (if using)
  2. Cut Glazing Bars, Top Caps and Underclad to desired length
  3. Fit Underclad to Glazing Bar and screw to Wall Plate (M6 x 20mm screws)
  4. Screw low end of Glazing Bar to Eaves Beam (M6 x 35mm screws)
  5. Cut Panel Support Trim and fit between each Glazing Bar
  6. Fit Polycarbonate End Closure (20mm short on either end)
  7. Lay polycarbonate panels between Glazing Bars (3mm gap either side)
  8. Tap the Top Capping down into position (use nylon hammer, wooden mallet, or protect the capping)
  9. Fit End Cap to each Glazing Bar
  10. Fit the Wall Plate End Covers and Eaves Beam End Covers
Roof Structure: Self-Supporting
Style: Heavy Duty Self-Supporting
Base Material: Aluminium
Capping Material: uPVC
Glazing Compatibility: Glass (Double-Glazed), Polycarbonate (Multiwall)
Glazing Thickness: 16mm, 24/25mm, 32mm, 35mm
Related links to "Heavy Duty Self-Supporting Gable / Starter / End Bar"
Read, write and discuss reviews... more
Customer review for "Heavy Duty Self-Supporting Gable / Starter / End Bar"
Write a review
Reviews will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

You've Viewed