From: £1.78
Buy More & Save More (see tiered pricing table below)
Buy | Price |
---|---|
1 to 5 | £2.05 |
6 to 11 | £1.98 |
12 to 24 | £1.91 |
25+ | £1.78 |
Price incl. VAT - Delivery cost
Ready to despatch!
- Product Code: SOU-2221-1001
- Manufacturer Code: 115107
- Package Type: Packet
- Shopping Category: Hardware > Building Consumables > Hardware Glue & Adhesives
Soudal High Viscosity Superglue
(50g)
Bonds in seconds and suitable for any surface!
Soudal High Viscosity Superglue is a one-component, solvent-free cyanoacrylate adhesive suitable for many industrial and household applications and all substrates. Fast bonding and high strength, this is a must-have for tradesmen and DIYers.
The high viscosity of this superglue is great for porous surfaces, and reduces the movement of the glue, making it easier to control. Features a narrow, extended nozzle that allows for precision application, and reduces wastage.
Features & Benefits
- High strength - cyanoacrylate creates strong bond
- Easy to use - one-part glue with precision nozzle
- Trusted adhesion - heat, moisture, weather resistant
- All-round fixing - suitable for common building materials
- Reduced run-off thicker consistency slows movement
- Long-lasting bottle - larger 50g size
Suitable for a wide range of porous and non-porous surfaces, including MDF, rubber, PVCu, metals and most plastics.
Did you know? Cyanoacrylate cures on contact with atmospheric moisture. Though extremely fast bonding, curing time can be reduced further with the Soudal Superglue Activator. Both products can be purchased together, as a Mitre Kit.
Technical Information
Feature | Value |
---|---|
Material | Ethyl cyanoacrylate |
Consistency | Liquid |
Curing System | Chemical curing with atmospheric moisture |
Curing Time | 3-60 seconds depending on substrate |
Viscosity (cP) | 1000-15000 |
Application Temperature | +5°C to +35°C |
Temperature Resistance | -20°C until +80°C after curing |
Substrate Compatibility | MDF, rubber, PVCu, metals, and most plastics. |
Shelf Life | 12 months unopened, in cool and dry storage place |
Application & Usage
- Clean the surface, ensuring it is dry, and free of any loose particles and grease.
- Apply drop or drops to one surface only. Apply enough to leave a thin film after compression of the two substrates.
- Activator can be optionally sprayed onto one substrate to accelerate bonding.
- Press substrates together, and hold firmly for a few seconds to ensure good contact.
* For a better hold on smooth surfaces, gently rough up the surface with sandpaper or steel wool.